INSTRUCTIONS FOR USE
AGP 1000 – 2000 PRO
Rev.02/2019
42
9
ADDITIONAL EQUIPMENT
Additional equipment includes the elements which are not part of the standard mist blower
equipment but can be additionally mounted to facilitate or improve the operation of the machine.
It includes:
•
the external cleaning kit,
•
the packaging and strainer cleaner under the lid,
•
the electronic regulation with remote control (chapter 10.2),
•
the suction basket with a 5 m suction hose,
•
nozzle holder for spraying tall crops.
9.1
External cleaning kit
Figure 9.1
After the spraying is finished, the mist blower
must be cleaned. The most appropriate place
for cleaning is at the edge of the area that was
sprayed. For this purpose the external
cleaning kit is used, which contains:
•
a spraying lance,
•
a flexible hose and
•
an adapter for attaching the spraying
lance to the pressure regulator.
Connect the connection adapter of the kit to
the free diverter valve on the pressure
regulator or to the selector valve (23 – Figure
8.1).
Move the other valves on the spraying device
into the position for partial cleaning of the
mist blower (see previous chapter).
9.2
Packaging and strainer cleaner under the lid
The packaging and strainer cleaner is designed to wash the packaging of liquid plant protection
chemicals or to flush the powder-based spraying agents from the strainer into the reservoir. It is
installed under the lid of the reservoir and connected to the diverter valve on the pressure regulator.
When the diverter valve for packaging and strainer cleaning is opened, it is necessary to adjust the
pressure (5-10 bar). Remove the lid (yellow) from the funnel of the cleaner, penetrate the protective
film under the lid using the sharp section of the nozzle and push it against the limiter (1). When
the packaging contents have been emptied, push the neck of the bottle or the plastic container,
together with the limiter (2), down towards the bottom of the pouring sieve. This opens the valve
and activates the nozzle, which thoroughly washes the inside of the packaging. When the bottle is
removed, the valve closes the rinsing water supply.
