Agria 3900 Operating Instructions Manual Download

Page: 43 / 74

Edition 04.97

Two-wheel tractor 3900

4. Commissioning and Operation

Operations

Start the engine as specified in chap-

ter “Starting the Engine”.

Engage proper gear via gear shifter

(B/7).

For operations with PTO-powered

attachments:

Move PTO speed shifter (B/5) forward
in driving direction – attachment drive
is switched on.

Pull slightly on hand clutch lever

(B/2), unlock pawl (B/3) and slowly re-
lease it while you are pressing the throt-
tle.

Direction change from forward to
reverse:

Set speed control lever to idle posi-

tion.

Pull hand clutch lever backwards

(B/2).

Move the shifter (B/7) to “R”.

Slowly release the hand clutch lever

while you are pressing the throttle.

Proceed vice versa for direction change
from reverse to forward.

Never leave two-wheel tractor

unattended with the engine
running.

Never leave operator’s position at
steering handle during operation.

Never readjust steering handle dur-
ing operation – danger!

During all operation with the two-
wheel tractor, especially when turn-
ing, the operator must keep at a safe
distance as defined by the steering
handle.

Note for Mowing

After mowing or in case of jams:

Move gear shifter to idle position. The

machine comes to a stop but not the
knives, thus freeing the cutter bar from
grass.

Move the PTO speed shift lever to

position “0”.

If cleaning becomes neces-

sary during operation, the
engine must be switched off

and the spark plug connector discon-
nected or the ignition key removed
for safety reasons.

Mowing on plain
surfaces

Mowing on
slopes

Summary of Contents for 3900











































































Search results

Summary of Contents for 3900

Reviews:

Related manuals for 3900

Brands by name

Popular brands

Agria 3900, Operating Instructions Manual

Search results

Summary of Contents for 3900

Reviews:

Related manuals for 3900

Brands by name

Popular brands