agria
Power Hoe 900 / 900-S
21
3. Devices and Operating Elements
Depth bar
The depth bar slows down the power hoe
as the machine is moving forward in the
field. The deeper the depth bar setting, the
deeper the working depth of the hoeing
tools.
Type 900 (0900 041)
You can set the depth bar (G/1) to one of
four different positions using the locking pin
(G/2). The bar is set to either rigid or pivot-
ing position. To set it to rigid position, lock it
into hole ”A”, and to set it to pivoting posi-
tion, lock it into hole ”B”.
Type 900-S (0900 141)
To set the working depth of the depth bar
(A/21), fit the R-clip (A/27) in one of the
two attachment holes.
Optional depth bar
Available for version 900-S (0900 141)
This depth bar (accessory no. 1001 511)
(H/1) is available as an option to improve
depth control in loose soils. Remove the
standard depth bar (A/21) and replace it
by the optional depth bar, using the R-clip
(H/2).
Front support wheel
For easier transport, use the front support
wheel. Slide the wheel onto the wheel pin
(I/2) at the front of the machine while the
wheel is in position B. Then tighten the at-
tachment screw (I/1). You can leave the
front support wheel on the machine for
hoeing in position A.
3
G
I
H
A/27
A/21
