agria
Power Hoe 900 / 900-S
11
1. Safety Instructions
1
In case of blockages in the attachment,
shut off the engine and clean the attach-
ment with an appropriate tool.
In case of damage to the power hoe or
to the attachment, immediately shut off
the engine and have it repaired.
If steering causes problems, immedi-
ately bring the power hoe to a halt and
shut it off. Have the malfunction repaired
without delay.
To prevent the machine from slipping on
slopes make sure it is secured by an-
other person using a bar or a rope. This
person must be located at a higher po-
sition than the vehicle at a safe distance
from the attachment at work.
If possible, always work at right angle
to the slope.
End of Operation
Never leave the power hoe unattended
with the engine running.
Before you leave the power hoe, shut
off the engine. Then close fuel taps (if
equipped).
Secure power hoe against unauthorized
use. If the machine is equipped with an
ignition key, remove the key. For all other
versions, remove the spark plug connec-
tor.
Attachments
Only mount attachments with the engine
and the attachment drive shut off.
Always use appropriate tools and wear
gloves when changing attachments and
parts thereof.
For mounting and dismounting attach-
ments bring the support devices into
proper position and ensure stability.
Secure the power hoe and attachments
against rolling off (parking brake, wheel
chocks).
Beware of injuries while coupling attach-
ments.
Hitch attachments as specified and only
couple at specified points.
Secure power hoe and attachment
against unauthorized use and rolling off
when you leave the machine. If neces-
sary, install transport or protective de-
vices and secure.
Hoeing
When hoeing, make sure the depth bar
is adjusted properly.
Maintenance
Do not maintain or clean the machine
while the engine is running.
Before you work on the engine, always
remove the spark plug connector.
