12
General Trouble Shooting
1. If system has a master control switch, make sure it is turned to “ON”
position.
2. Check all of the wiring components:
a. Check (+) and (-) wire connections on Vehicle Battery.
b. Check all wiring connections retighten and re-crimp if loose,
replace if corroded.
c. Check all wire for worn or bare spots.
3. Check Power Sources:
a. Check vehicle battery, charge or replace if required.
b. Check remote batteries replace with quality high capacity
batteries, make sure batteries are loaded correctly in the remote
and the terminals are clean.
4. Check for Physical damage to any equipment.
a. Repair or replace if required.
5. If system operates with toggle switch but not with remote (remote not
communicating with receiver)
a. Make sure remote is set to the correct mode. If remote
cannot be set to correct mode, reprogramming is needed, refer
to reprogramming portion of this manual.
