5
NOTE: This remote system requires a 50 amp modified reset circuit
breaker. If breaker trips and does not reset, it may have detected a
continuous short and will not reset until short is repaired. Disconnect
battery and repair short. The Receiver is also fitted with an internal
breaker designed to trip first. If this breaker trips the system will not
perform the same direction until the system has been reversed.
If installing this remote system on an existing unit, make sure there is a
circuit breaker installed and that it is operating properly. If breaker is missing
or malfunctioning, replace it with a correct new one. (50 amp modified reset
circuit breaker)
Note: Use dielectric grease
(packet included) at all
ellectrical connections.
DUAL POLE CONNECTOR
(USED IN SOME APPLICATIONS)
(M1)
(M2)
HEAVY GAGE WIRE