8
Clear Receiver
Power on receiver. Press and hold the
Programming
button until the
indicator light turns steady green. Power off Receiver.
Your Remote and Receiver will come pre-programmed to each other.
If they are not, follow the procedure below.
Create Primary Remote
Clear Remote - open cover to unlock remote. Push and hold
Select
button
then push and hold
Programming
button while
Select
button is still being
held. Hold both buttons until indicator light flashes red. Release both buttons.
Press
CLOSE
button. Indicator light will fast flash red then turn steady
green. Close Lid to power down and lock remote. Remote is now cleared.
Open cover to unlock remote. Push and hold
Select
button then
push and hold
Programming
button
while Select button is still being held.
Hold both buttons until indicator light
flashes red. Release both buttons.
Press
OPEN
button. Indicator
light will slow flash green.
Primary Remote has been
created. Close lid to power
down and lock remote.
Power
On/Off
Switch
Indicator
Light
Open
Close
Switch
Programming
Button
Select
Button
Programming
Button
Indicator
Light
Open Button
Figure 7 – Remote
Figure 6 – Receiver
Programming a Remote Control to
a Receiver
STEP 1
STEP 2
