2
PREPARATION
• Prior to tarp system assembly, park truck or trailer on level ground.
• Box must be square and straight, center must not be pulled together or spread apart.
• Remove or grind smooth any sharp edges or points contacting tarp and/or cables.
• Remove or reposition any interferences with motor. If modifications to box are
needed, consult box manufacturer.
• Ensure box extension is secure by bolting in place on top of your box.
TOOLS NEEDED
• (2) 1/2” Wrenches
• Step ladders or scaffolding
• Drill with 5/16” and 3/8” bits
• Protective eyewear
• Cutting tool(s)
• Marking pencil
• 9/16” Wrench
• Tape measure
NOTE:
Hardware appearance and components may vary.
!
CAUTION: Before drilling, ensure there are no hidden wires or gussets in line
with holes to be drilled.
