4
1: ATTACHING MOTOR
A. Place and weld motor mount slide frame to center of belly dump’s cross frame.
B. Mount motor to motor mount carriage with (3) 5/16” x 3/4” hex bolts and washers.
C. Slide motor on motor mount slide frame with motor facing front of trailer.
D. Attach face plate to motor mount slide frame using (2) 5/16” x 2” bolts, washers and
nylon nuts.
E. Attach drive shaft with U-joint to motor drive shaft.
F. Ensure motor is 1-1/2” from back of motor mount slide frame.
Motor
5/16” Nylon nut
5/16” x 2” Bolt
and washer
Face plate
Motor mount
slide frame
Drive shaft
with U-joint
Motor
Motor mount
carriage
5/16” x 3/4”
Hex bolt and
washer
