AGP V28B, Manual

Page: 23 / 65

V28B Chapter 2 Hardware Installation
22
The Wake-Up LAN connector is used for LAN add-on cards that supports
Wake-up on LAN function. To use this function, you need to set the “Wake-Up on
LAN” to enable at the BIOS Power Management Setup.
The Wake-Up Modem connector is used for the Modem add-on card which
supports the Modem Wake Up function. To use this function, you need to set the
“Modem Ring Resume” to enable at the BIOS Power Management Setup.
Note:
To be able to use this function, you need a power supply that
provide enough power for this feature. (Power supply with 740ma
5V Stand-by)