V28B Chapter 2 Hardware Installation
14
2-2.2 On Board AC’97 Sound
J2
Set JP2 at pin 1-2 to use onboard AC’97 sound card(default). Set JP2 at pin2-3 will disable
the onboard AC’97 sound card.
Note
When you need to use AMR MODEM, if you are using
onboard sound card, then you don’t need to set J2 (i.e J2 is
in the default SECONDARY state), but if you are stopped
to use the onboard sound card, then you must set J2 at 1-2
pin.
2-3 Power Supply Connector
Connect the power supply cable to the power connector. Using the ATX power supply
functions such as wake-Up Modem is supported by this mainboard.
1-2
AC’97 Enable (Default)
1
1
2-3 Disable
AC’97 Sound
1
Summary of Contents for V28B
Page 1: ......
Page 65: ...P N 73 V28B1010 000 ...
