GB
10
5) THE SWITCH
230V models:
This machine has a rocker switch. Press the switch to the on position to turn on.
Press the switch to the off position to turn off. If there is an interruption to the
power supply, the machine will restart when the power returns.
WARNING: Accidental starting hazard. Always ensure that the switch is in the
OFF position before plugging in.
WARNING: Whenever there is an interruption to the power supply, turn the switch to the OFF position to
avoid an accidental restart when power returns.
110V models:
This machine has a relay-type rocker switch. Press the switch to the on position
to turn on. Press the switch to the off position to turn off. Since this is a relay type
switch, if there is an interruption to the power supply, the machine will not restart
when the power returns. In this case first turn the switch to the off position then
back to the on position to restart.
HOLE STARTING FUNCTION
Whenever the motor is first switched on, for the first 4 seconds, it will run at 50% rotation speed. This is to aid in
starting the hole. After 4 seconds, it will increase to 100% rotation speed.
6) OVERLOAD PROTECTION AND OVERHEAT PROTECTION
Overload Warning System:
When the load approaches overload conditions, the LED indicator light will flash on and off.
Overload:
If the excessive load is sustained too long, the motor will shut down completely
and the LED indicator light will glow solid red. In this case, the motor must be first
shut off and then restarted.
Overheat Thermal Protection:
If the temperature of the motor gets too high, the thermal protection will shut
the motor down and the LED indicator light will glow solid red. The switch must be first shut off and then
restarted.
CAUTION: The motor will be damaged if it is repeatedly overloaded or overheated.
Always cool the motor by running at no load for a few minutes whenever it stops from either overheat or
overload.
On/Off Switch
110V models
230V models
On/Off Switch
LED Indicator Light
Summary of Contents for DM10
Page 98: ......
