13
then tighten the butterfly bolt.
FLUSH CUTTING KIT INSTRUCTIONS (Optional)
The flush cutting kit enables a flush cut blade (not included) to be mounted
to the machine which allows flush cuts to be made while the outer blade
guard is temporarily removed. The flush cut blade may be left in place and
the operator may return to standard cutting simply by replacing the outer blade guard and securing with the
4 toggle latches. In this way, it is quick and convenient to switch
between standard and flush cutting mode. Or if desired, the flush
cutting blade and flange may be removed and the machine returned
to the standard configuration.
FLUSH CUTTING KIT LIST OF CONTENTS
1.
Flush Cutting Flange
2.
Socket Cap Arbor Bolt & Washer
3.
Flat-Head Socket Cap Screws x 6
4.
M5 L-Hex Wrench
5.
M8 L-Hex Wrench
6.
Rim Brush
FLUSH CUTTING KIT ASSEMBLY
To mount the flush cutting kit, first remove the standard arbor bolt, flanges and blade .
1.
Mount the flush cutting flange on the spindle and secure with the washer and socket cap arbor bolt.
Engage the arbor lock tighten the arbor bolt securely using the M8 L-hex wrench.
2.
Mount the flush cut blade on the flange, align the holes and thread in the flat-head socket cap screws.
Using the M5 L-hex wrench, tighten the screws evenly and diagonally.
FLUSH CUTTING KIT OPERATION
1.
Remove the the water hose from water nozzle on the outer blade guard and connect it to the alternate
water nozzle on the inner blade guard.
2.
Remove the 6 screws securing the outer blade guard .
3.
Unclip the 4 toggle latches and pop the loose hasps in the plastic clips to prevent rattling.
4.
Lift away the outer blade guard and keep in a safe place.
5.
Press the rim brush into the track provided in the inner blade
guard.
6.
Once the flush cutting operation is completed, immediately
remove the rim brush and replace the outer blade guard and
water hose.
WARNING: Always operate with the outer blade guard in place
Butterfly Bolt
Alternate Water Nozzle
Toggle Latches
Flat-head Socket
Cap Screws
