Agora Models Pack 07, Build Instructions

Page: 10 / 39

AGORA MODELS
10
9
11
10
12
This is how your wheel should look after fitting the first row of spokes.
Start in the same way, threading the tip of a spoke through a hole in
the uppermost row.
Check that all the spokes have been fitted to the innermost row of the
wheel centre. Next, you will fit spokes to the uppermost row.
The spoke tips will now face in the opposite direction to those fitted
on the bottom row. Make sure that they are hooked around a ‘wide’
tooth otherwise they cannot be secured in place in a later step.
Stage 51: Left Front Wheel