Agora Models Pack 07, Build Instructions

Page: 34 / 39

AGORA MODELS
34
S T E P 1
1
3
2
4
Take the spacer ring and align it over the wheel from Stage 55. There is
a hole on the ring with a corresponding peg on the wheel (arrows) to
ensure the correct fit.
Turn the wheel over so that the smaller side of the wheel centre is
facing you. Note that there are two rows for threading the spokes –
an inner row and an outer row. You’re going to start on the inner row.
Lower the ring onto the wheel and press firmly until it clicks into place.
Using tweezers, thread a type A spoke through a hole on the
inner row . Direct the tip of the spoke through the diamond-shaped
opening slightly clockwise (coloured red above) so that the tip pokes
through to the opposite side.
Stage 56: Right Rear Wheel
Outer row Inner row
Type A spoke