Agora Models Pack 07, Build Instructions

Page: 22 / 39

AGORA MODELS
22
S T E P 1
1
3
2
4
Take the completed wheel from Stage 52. Prepare a hot water bath by
filling a small bowl with boiling water. Soak the tyre in the water for 2
minutes.
Note: The tyre shown in pictures 1-4 is the spare tyre from Stage 25,
and differs slightly in the tread pattern from the tyre supplied in this
Stage. The method for fitting the tyre is the same.
Working quickly while the tyre is pliable, push the wheel into the tyre
and twist to fit the outer wheel rim under the inner rim of the tyre.
Carefully remove the tyre from the water bath using tongs or tweezers
- the tyre will be very hot! Shake off any excess water and dab on
kitchen paper or a towel.
Keep pushing and pulling, working around the tyre, until the side walls
fit comfortably over the wheel rim on both sides.
Stage 53: Left Front Wheel