15
Wolf-7 PRO
USER MANUAL
3 MAINTENANCE INSTRUCTIONS
3.1 CLEANING PROCEDURES
Wipe the housing with a damp cloth as needed.
CAUTION:
Do not use abrasives or solvents to clean the housing, lens, or display window of the device. Do
not use ammonia-based cleaning products to clean the lens. Doing so may damage the anti-
reflective coating of the lens.
The Wolf-7 PRO lens is designed for the harsh outdoor environment and has a coating for durability
and anti-reflection, but it may require occasional cleaning. Avoid scratching the lens and/or leaving
fingerprints on the optics. Improper cleaning can damage the optics. Clean the lens according to
the instructions below.
Do not use abrasive materials, such as paper or scrub brushes, as this can scratch or otherwise
damage the lens. Only wipe the lens clean when there is visible contamination on the surface.
Preferred Method for Cleaning the Lens
Materials:
• Optical-grade cloth
• Pure water (deionized or other)
• Isopropyl alcohol (IPA)
Saturate a piece of the lens tissue with water and drape it over the lens. Let the surface tension
of the water pull the tissue onto the lens surface. Drag the tissue across the lens surface. Repeat
several times with different pieces of tissue.
Repeat the same step using isopropyl alcohol instead of water. Drag the final piece of tissue over
the lens several times to prevent pooling, which may leave a residue behind.
3.2 TROUBLESHOOTING
Table 3-1 lists the most common malfunctions that may occur with your equipment. Perform the
tests, inspections, and corrective actions in the order they appear in the table.
This table does not list all the malfunctions that may occur with your device, or all of the tests,
inspections, and corrective actions that may be necessary to fix them. If the equipment malfunction
is not corrected by the suggested actions, or a problem occurs that is not listed in this table, please
contact AGM Global Vision’s Customer Support center or your retailer.
