9
Wolf-7 PRO
USER MANUAL
2 OPERATING INSTRUCTIONS
2.1. INSTALLATION AND MOUNTING
CAUTION:
To protect the intensifier tube when the sight is not in use or when it is being operated in daylight,
keep the protective lens cap securely fitted over the lens.
2.1.1 BATTERY INSTALLATION
To install batteries:
1. Turn the battery cap counterclockwise and remove it.
2. Verify that the O-ring is present. If it’s not, replace it.
3. Following the polarity markings on the outside of the battery compartment, insert either two AA
(1.5 V) batteries into the battery compartment, positive (+) end first (see Figure 2-1).
4. Secure the battery cap back on by placing it over the compartment and turning it clockwise.
Verify that it is secure to ensure a watertight seal.
2.1.2 INSTALLATION OF THE EYECUPS
To install the eyecups (refer to Figure 2-1):
1. Carefully press each eyecup over the diopter cell retainer.
2. Rotate each eyecup into the proper viewing position. Adjust for the best fit. The eyecups must
seal around your eyes and prevent the green light from showing outside of the eyepieces.
AA BATTERIES
BATTERY CUP
EYECUP
FIGURE 2-1. BATTERY AND EYE CAP INSTALLATION
