AGM Global Vision
6
Maintenance
• If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.
• Wipe the device gently with a clean cloth and a small quantity of ethanol, if
necessary.
• If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the device may be impaired.
• Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
• Make sure the running environment meets the requirement of the device.
The operating temperature shall be -20°C to 55°C (-4°F to 131°F), and the
operating humidity shall be 95% or less.
• DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-
alkali, or damp environments.
• This device can only be safely used in the region below 2000 meters above
the sea level.
• Avoid equipment installation on vibratory surface or places subject to shock
(neglect may cause equipment damage).
• DO NOT aim the lens at the sun or any other bright light.
NOTES:
• The detector spectral band provides better visibility through smoke, dust,
rain, smog, etc.
• Infrared radiation does not travel through glass. As a result, the monocular
does not detect objects if they are behind glass windows or other barriers.
EMERGENCY:
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
