FUZION
USER MANUAL
17
2.2.8 CVBS OUTPUT
You can view the video on CVBS monitor, to get a better and clear image, more
convenient to check the detail.
1. Connect the USB-CVBS cable to USB port of thermal monocular and to
monitor’s CVBS port.
NOTE:
USB-CVBS cable need to be purchase separately.
NOTE:
CVBS Output function doesn’t support hot plug, so please connect the cable
before power on.
2. Hold button to show the menu.
3. Select
CVBS
menu item and press button to turn on or turn off the CVBS
video output.
2.2.9 DEFECTIVE PIXELS CORRECTION
Defective Pixels Correction (DPC) function can correct the defective pixels on
the screen which are not performed as expected.
Before you start switch the palettes mode to White Hot mode.
1. Hold button to show the menu.
2. Rotate the wheel to select
DPC menu item, and press to enter the DPC
setting interface.
3. Press to switch the moving direction of the cursor, and rotate the wheel to
move the cursor until it reaches the defective pixel.
4. Press to correct the defective pixel.
NOTE:
When Holding
in the DPC interface, the menu at the bottom of the interface
can be mirrored to the top of the interface.
The selected defective pixel can be magnified and displayed at the bottom
right of the interface.
FIGURE 2-6. DEFECTIVE PIXELS CORRECTION
