AGM Global Vision
18
2.2.10 BURNING PREVENTION
This function can prevent damage to the thermal sensor from the sun or other
high temperature bright light source. When enabling this function, the shield
will close until the environment turns to normal.
1. Hold button to go to the menu.
2. Rotate the wheel to select menu item and press button to enable or
disable the Burn Prevention function.
NOTE:
When the burn-prevention function is disabled, the shield won’t be forced to
close in such conditions.
2.2.11 LANGUAGE SETTING
You can select different languages of user interface.
1. Hold button to show the menu.
2. Rotate the wheel to select Language menu item and press button to
select the language.
3. Rotate the wheel to select the language as required, and press to confirm.
2.2.12 VIEW DEVICE INFORMATION
1. Hold button
to show the menu of device.
2. Select
Version menu item and press button. You can view the device
information such as firmware version, and serial number.
2.2.13 RESTORE DEVICE
You can reset the settings of device.
1. Hold button to show the menu of device.
2. Select Restore menu item and press button to restore the device to
defaults according to the prompt.
2.2.14 TIME SYNCHRONIZATION
1. Hold button to show the menu.
2. Rotate the wheel to select menu and press button to enter the Time
Sync.
3. Press to switch the time system, and rotate the wheel to select the time
and date to be synchronized.
4. Press and rotate the wheel to set the time and date, and press again to
finish the setting.
5. Hold to save settings and exit.
2.2.15 OSD
1. Hold button to go to the menu.
2. Rotate the wheel to select
/
menu item and press button to switch
the OSD mode.
