AGM Global Vision
20
2.3 CLIENT SOFTWARE INTRODUCTION
We recommend using T-Vision software. Install the client software on
your mobile phone first, and then connect your phone to the hotspot of the
monocular. Refer to section 2.2.18 for details of hotspot connection.
NOTE:
The device password is set by user at first activation. If the password was lost
or forgotten, it can be reset. To make a reset, provide the following action:
1. Hold
button to show the menu of device.
2. Move the cursor to menu item and press the button to restore all
parameters to default settings.
1. Run the app and connect the phone or tablet with the device.
2. If the device is inactivated, set the password and activate it. If the device is
activated, enter the password to add it to the app.
3. When the device is added, the live view can be seen. You can view the
interface of the monocular on the software. User can change such image
parameters as brightness, contrast, zoom, palettes directly via phone or
tablet as well as record video on phone/tablet memory.
Fuzion
FIGURE 2-7. CLIENT SOFTWARE
Device [Fuzion]
