Using the Scope Functions
3
Agilent U1602A/U1604A User’s and Service Guide
55
2
Press F1 softkey to access channel 1 (CH 1) submenu or F2 to access
channel 2 (CH 2) submenu.
3
The submenu for both channels are similar. Figure 3- 2 shows the
generic submenu for channel 1. To enable waveform display for channel
1, press F1 to display the pull- up menu.
Figure 3-2
Select On or Off to enable or disable the waveform display
4
Select “On” in the pull- up menu by pressing F1 to display waveform
input.
5
In the “On” state, the vertical sensitivity in Volt/div (displayed in V/)
and indication of the vertical ground reference position will be
displayed according to the position setting of the channel (refer to the
next section for detailed explanation).
6
You can perform the same procedure for channel 2 or for both
channels.
Vertical ground
reference symbol
