8
General Disassemble
190
Agilent U1602A/U1604A User’s and Service Guide
To remove front and rear casing
1
Perform the following procedures:
•
•
•
To remove handler
2
After performing the above two procedures, gently dismantle the front
and rear casing from the instrument.
3
Remove the terminal connector and washer from the multimeter input
terminal. Remove the AC power connector from the instrument and
keep safe for the instrument re- assemble.
Figure 8-9
Remove and keep the above wear-and-tear parts for re-assemble process
AC Power Connector
Multimeter input terminal connector
