4-2
TS-8900 Functional Test System Site Preparation and Installation Guide
4
Installing The Keyboard, Mouse and Printer
Tools Required
# 2 Phillips screwdriver
This chapter describes how to install the keyboard shelf, mouse
tray and printer tray onto the Test Rack, how to connect the
keyboard and mouse, and how to connect an optional strip
printer.
N O T E
Four captive nuts are installed on the front of the test rack to receive the
keyboard shelf screws. These nuts are located immediately below the
flat panel display. If you need to locate the shelf elsewhere, four
additional captive nuts are included with the shelf kit.
