Agilent Technologies TPS-mobile 9698403, User Manual

Page: 391 / 400

Technical Information
Appendix 1
17
TPS-mobile User Manual / 87-901-005-01 (F) 391/400
NOTE
PN 9698433 is already supplied with an integrated power cord so you don’t need
to perform this step.
4
Provide the correct voltage to the system through the power cord.
5
The system is equipped with a main switch (thermal breaker)
able to protect the system components against overload or short-
circuits. Move the breaker switch to the position “1” to start
operating with the TPS-mobile.
6
The system activation by means of the Main Switch provides
voltage to TMP controller but both TMP and Foreline pump
continue to be switched off.
The system activation allows the TMP controller to start reading
the pressure data through the optional FRG-700 Full Range
Gauge if it is connected to the gauge connection port on the rear
side of the system.
Main switch
(with thermal protection)