Agilent Technologies TPS-mobile 9698403, User Manual

Page: 384 / 400

17 Technical Information
Letter Protocol Description
384/400 TPS-mobile User Manual / 87-901-005-01 (F)
111 R/W L Analog output type: output voltage signal
proportional to frequency or power or
pump temperature or pressure 0 = frequency
1 = power
(default = 1)
2 = Pump temperature
3 = Pressure
117 R/W N Low Speed frequency (Hz) 250 to “Maximum rotational
frequency” (win 121)
(default = 700)
120 R/W N Rotational frequency setting (Hz) 900 to “Maximum rotational
frequency” (win 121)
(default = 963)
122 R/W L Set vent valve on/off (on = closed) On = 1
Off = 0 (default = 1)
123
124 Reserved to Agilent service
125 R/W L Set the vent valve operation Automatic = 0 (see note 1.)
On command = 1 (see note
2.)
126 R/W N Vent valve opening delay (expressed in 0.2
sec) 0 to 65535 (corresponding
to 0 to 13107 sec)
130 Reserved to Agilent service
147 R/W N Vent open time
See “vent connector” paragraph
0 = infinite
1 bit = 0.2 sec
155 R N Power limit applied
Read the maximun allowable power watt
157 R/W N Gas load type.
Select the gas load to the pump Ø = N
2
1 = Ar
161 R/W N Pressure Reading Connection Factor
See “GAUGE CONNECTOR” for more details
0 to 10
0 = 0
10 = 1 = N
2
162 R/W A R1 Set Point Pressure Valve
Valid if min. 101 = 4
Format X.X E. XX
Where X = 0 to 9 s = + or -