Agilent Technologies N9010A, Manual

Page: 11 / 107

Chapter 1 11
Making TD-SCDMA with HSPA/8PSK Measurements
Setting Up and Making a Measurement
NOTE
A setting may be reset at any time, and will be in effect on the next
measurement cycle or view.
2. Select and Set Up
the Measurement a. Press
Meas.
b. Select the specific
measurement to be performed.
c. Press
Meas Setup
The measurement begins as soon
as any required trigger
conditions are met. The resulting
data is shown on the display or is
available for export.
Use Meas Setup to make any
required adjustment to the
selected measurement settings.
The settings only apply to this
measurement.
3. Select and Set Up a
View of the Results Press
View/Display
. Select a
display format for the current
measurement data.
Depending on the mode and
measurement selected, other
graphical and tabular data
presentations may be available.
X-Scale
and
Y-Scale
adjustments
may also be made now.
Table 1-2 Main Keys and Functions for Making Measurements
Step Primary Key Setup Keys Related Keys
1. Select and set up a mode.
Mode Mode Setup,
FREQ Channel System
2. Select and set up a
measurement.
Meas Meas Setup Sweep/Control
,
Restart
,
Single
,
Cont
3. Select and set up a view of the
results.
View/Display SPAN X Scale
,
AMPTD Y Scale
Peak Search,
Quick Save
,
Save
,
Recall
,
File
,
Print
Table 1-1 The 3 Steps to Set Up and Make a Measurement
Step Action Notes