Agilent Technologies N5340A, Installation Manual

Page: 21 / 34

Installing OBSAI Protocol Tester
3
Installation Guide 21
To remove legacy components, do the following:
a
Click Yes . The uninstallation process starts. Once this process ends,
the Uninstall Complete screen of the wizard appears.
b Click Finish .
This takes you back to the Install System Protocol Tester Software page.
5
Repeat Steps 3 and 4.
This time, the welcome screen of the installation wizard appears.
6 Click Next .
The License Agreement screen appears.
7
Select I accept the terms of the license agreement .
8
Click Next .
The Setup Type screen appears. This screen prompts you to select the
setup type that best suits your need.
9
Select one of the following options:
a
Client (GUI only) : Select if you want to install only the Client
software on your PC.
b Cont Client (Full) : Select if you want to install both the
Controller and Client software on your PC.
10
Click Next .
The Ready to Install the Program screen appears.
11 Click Install .
This installs System Protocol Tester, and displays the next screen of the
wizard.
12 Clear the View Readme.txt check box if you do not want to view the
Readme.txt
file.
13
Clear the Run USB network adapter Config Helper check box.
14
Click Next .
The InstallShield Wizard Complete screen appears.
15 Click Finish .
This completes the System Protocol Tester installation.
Installing OBSAI Protocol Tester with the USB Network Adapter
To install OBSAI Protocol Tester with the USB Network Adapter:
1 Repeat steps 1 to 12 from the previous section.
2 Select the Run USB network adapter Config Helper check box.