Agilent Technologies N5340A, Installation Manual

Page: 18 / 34

18 Installation Guide
3
Installing OBSAI Protocol Tester
Configuring the Controller PC
You need to configure the Controller PC to enable communication between
the Controller and Client PCs for data interchange.
In order to configure the Controller PC, you need to set up the FTP
service.
Setting Up the FTP
On the Controller PC, you need to install and enable the FTP service to
download firmware for various test modules. For this requirement, OBSAI
Protocol Tester provides a third- party FTP server named WARftp.
Remember the following about WARftp while installing OBSAI Protocol
Tester:
• WARftp is automatically installed and configured while installing OBSAI
Protocol Tester.
• WARftp is installed only when the default FTP service is not installed
on the Controller PC.
• Do not install WARftp prior to installing OBSAI Protocol Tester.
• Uninstall WARftp if it is already installed, as it halts the installation of
OBSAI Protocol Tester.
If you are not allowed to use WARftp, you can use the FTP server that
comes with the Windows operating system. In Windows, FTP is a part of
Internet Information Services (IIS).
In this section, you will learn:
• “To Install FTP
N O T E
You do not have to configure the Client PC if you have planned to install
both the Controller and Client software on a single PC.
N O T E
WARftp restricts many organizations, such as government organizations,
from using it. For more information on using WARftp, please refer to
www.warftp.org. Also, please refer to the license notes to find out if you
can use WARftp.
N O T E
If IIS is already installed on the Controller PC, then skip to the next section.