Agilent Technologies N5340A, Installation Manual

Page: 14 / 34

14 Installation Guide
2
Setting Up the Hardware
Setting up the N5341A module
Once you have adjusted the modules inside the chassis, set up the N5341A
module.
Figure 3 N5341A module
To set the N5341A module
• For RP3- 01 connection : First, ensure that SFP is inserted into the
RP3- 01 optical port. Then, connect the one end of the optical fibre
cable to the RP3- 01 optical port, and the other end to device under test
(DUT).
• For RP3 connection : Connect the electrical Tx port of DUT to the Rx
ports of the N5341A module.