Agilent Technologies E2730A, Installation And Operation Manual

Page: 62 / 75

E2730A VXI RF TUNER
OPERATION 3-29
3.4.9 FACTORY CONFIGURATION MESSAGES
The commands in this message category, which begin with the pound sign
(#), are valid only when the tuner is in configuration mode. These
commands are used to configure the tuner’s EEPROM with parameters
required for proper operation. These parameters should not be altered
without factory direction. To use these commands the tuner must first be
placed in the configuration mode by sending the CFG 1 User Configuration
command (refer to
Table 3-14 ). After setting the configuration parameters,
the tuner must be removed from the configuration mode by sending CFG 0.
The mnemonics associated with this message category are listed in
Table 3-15 .
NOTE: Many of these parameters are unique to the particular tuner
serial number and should not be changed.
Table 3-15. Factory Configuration Messages
Command Response Description
#CDT nrf,nrf,nrf Set the date of configuration.
Field Parameter Range
1 Month
1 to 12
2 Day 1 to 31
3 Year 0000 to 9999
#CDT? #CDT nr1,nr1,nr1 Request the configuration date.
Default: #CDT 01,01,2000
Example: #CDT 06,25,1997
#COP Set the options configured in the unit.
Bit Options
0 TBD
1 TBD
2 TBD
3 TBD
4 TBD
5 TBD
6 TBD
7 TBD
#COP? #COP nr1 Request the options configured in the unit.
Default: #COP 00000
Example: #COP 00000