Agilent Technologies DSO9024H, User Manual, Page: 77 / 102

Using the Oscilloscope
77
To adjust horizontal position
The horizontal position is the time relative to the trigger at the highlighted
horizontal reference point.
• To zero the horizontal position, click the 0 button next to the position value at
the bottom of the waveform display.
This will position the trigger event at the highlighted horizontal reference
point.
• To move the waveform to the right or left, click the right or left arrow next to
the position value at the bottom of the waveform display. Or, click and hold
the mouse button on the desired waveform and drag the waveform to the right
or left. Release the mouse button when the waveform is in the desired position.
Clicking and dragging a waveform changes the horizontal position for all
channels and functions on the display, but not that of waveform memories.
You can also adjust the horizontal position through the Horizontal Setup dialog
box.
Figure 3-21
Adjusting Horizontal Position
Reset the
horizontal
position to
zero
Move the
waveform to
the right Move the
waveform
to the left
Click to set the
horizontal position
through a pop-up
numeric keypad