Agilent Technologies DSO9024H, User Manual, Page: 70 / 102

Using the Oscilloscope
70
To turn a channel on or off
• To turn a channel on, click the check box next to the channel number so that
a check mark appears in the box. To turn a channel off, click the check box
again to clear it.
See figure 3-15.
If you are not using a channel, you can turn it off. This simplifies the waveform
display and also increases the display update rate. When you turn off a channel,
the current vertical scaling factor and vertical scale buttons for that channel
disappear. They re-appear when you turn the channel on.
You can also turn a channel on or off by using the Channel Setup dialog box,
or by using the front panel key for that channel.
Figure 3-15
Turning a Channel On or Off
Turn a channel off
by clicking the On
check box until the
box is cleared
Turn a channel on by
clicking the On
check box until a
check mark appears