Agilent Technologies Agilent 86120B, User Manual

Page: 180 / 268

5-48
Programming Commands
CALCulate3 Subsystem
DELTa:REFerence:FREQuency
Selects the reference laser line for DELTa calculations.
Syntax :CALCulate3:DELTa:REFerence:FREQuency{?| {<real> | MINimum | MAXimum}}
<real> is a frequency value that is within the following limits:
Constant Description
MINimum 181.6924 THz
MAXimum 428.6 THz
Attribute
Summary Preset State: 428.6 THz (700 nm)
*RST State:428.6 THz (700 nm)
SCPI Compliance: instrument specific
Description The reference will be the laser line at the frequency closest to the frequency
entered. Subsequent measurements will use the frequency closest to the ref-
erence frequency used for the previous measurement.
The query returns the reference laser line’s frequency. The default units for
the
<real> parameter are Hz.
DELTa:REFerence:POWer?
Queries the reference laser line’s power level.
Syntax :CALCulate3:DELTa:REFerence:POWer?
Attribute
Summary
Preset
State: not affected
*RST State: not affected
SCPI Compliance: instrument specific
Query Only