Agilent Technologies 8698961R002, User Manual

Page: 292 / 304

17 Technical Information
Turbo-V 1K-G Navigator Controller Installation
292/304 Turbo-V 1K-G User Manual / 87-901-025-01 (A)
Turbo-V 1K-G Navigator Controller Installation
The controller can be mounted on the pump bottom.
To install the controller execute the following procedures.
Bottom mounting
See the following figure.
1
Turn the pump upside-down;
2
Place the three washers on the pump bottom in correspondence
of three hole at 120°;
3
Place the controller on the washers, with the pump cable toward
the pump body;
4
Fix the controller to the pump bottom by means of the three
socket head screws M5;
5
Turn the pump again;
6
Plug the line card and connect the pump cable to the pump;
7
Connect the mating connector with the jumper on the interlock
signal to start the pump.