Agilent Technologies 8698961R002, User Manual

Page: 233 / 304

Instructions for Use
General Information
16
Turbo-V 1K-G User Manual/ 87-901-025-01 (A) 233/304
General Information
This equipment is destined for use by professionals. The user should
read this instruction manual and any other additional information
supplied by Agilent before operating the equipment. Agilent will not
be held responsible for any events occurring due to non-compliance,
even partial, with these instructions, improper use by untrained
persons, non-authorized interference with the equipment or any
action contrary to that provided for by specific national standards.
The Turbo-V 1K-G is turbo-molecular pump for high and ultra-high
vacuum applications. It can pump any type of gas or gas compound.
It is not suitable for pumping liquids or solid particles. The pumping
action is obtained through a high speed turbine (max. 45660 rpm)
driven by a high-performance 3-phase electric motor. The Turbo-V
1K-G is free of contaminating agents and, therefore, is suitable for
applications requiring a "clean" vacuum.
When used with Navigator controller 9698978M005, the pump is
equipped with auxiliary connectors to supply an additional fan, to
control the vent valve, to be controlled from a remote site by means
of an host computer connected through a serial line (RS232 or
RS485).
The following paragraphs contain all the information necessary to
guarantee the safety of the operator when using the equipment.
Detailed information is supplied in the appendix "Technical
Information".