manualshive.com logo in svg

Agilent Technologies 83400 Series, User Manual, Page: 53 / 82

Share
Download
Agilent Technologies 83400 Series User Manual Download Page 53

3-2

Specifications and Regulatory Information

Specifications and Regulatory Information

Specifications and Regulatory Information

This chapter lists specifications and characteristics of the instruments and 
also includes regulatory information pertaining to the instruments. Specifica-
tions describe warranted performance over the temperature range 25

°

C 

±

5

°

C 

and relative humidity <95% (unless otherwise noted). All specifications apply 
after the instrument’s temperature has been stabilized after 1 hour of continu-
ous operation, and that the optical connector adapter used is an HMS 10 Dia-
mond. 

Specifications

Specifications

 describe warranted performance.

Characteristics

Characteristics

 provide useful, but nonwarranted, information about the 

functions and performance of the instrument. 

Characteristics are printed in 

italics.

 

Calibration cycle

Agilent Technologies warrants instrument specifications over the recom-
mended calibration interval. To maintain specifications, periodic recalibrations 
are necessary. We recommend that Agilent 83411C/D receivers be calibrated 
at an Agilent Technologies service facility every 24 months. We recommend 
that all other sources and receivers be calibrated every 12 months.

Summary of Contents for 83400 Series



















































































Reviews:

No comments