Agilent Technologies 16700 Series Product Overview Download Page 8

Page: 8 / 125

Connection for optional monitor.
(Up to 1600x1200 video
resolution with option 003)

10/100BaseT LAN - autosensing

Parallel printer port

SCSI-II connection for an
external 18 GByte data drive or
external removable hard drive

Expander frame connection provides an
additional five slots for measurement
modules.

Built-in 40x CD-ROM drive makes it easy

to install or update system software,

processor support, or tool sets.

Option slot for an emulation module or
for a multiframe module. Multiframe
option allows up to eight mainframes
and expanders to be combined so that
you can see all the buses in a complex
target system.

Mainframes

Back Panel

Figure 2.2. The mainframe and expander frame provide advanced capabilities for debugging complex target systems.

Five slots for
measurement
modules

Summary of Contents for 16700 Series






























































































































Search results

Summary of Contents for 16700 Series

Reviews:

Brands by name

Popular brands

Agilent Technologies 16700 Series, Product Overview

Search results

Summary of Contents for 16700 Series

Reviews:

Brands by name

Popular brands