29
Probing solutions to match the
measurement capabilities
Three probing options are available
for the Agilent 16760A. Each probe
can be ordered by its individual
model number or as an option to the
16760A. The following table indicates
both the model number and the
option number.
Probes are not supplied as part of the
standard 16760A. Probes must be
ordered separately, either as options
to the 16760A or individually by their
respective model numbers.
Data Acquisition and Stimulus
State/Timing Modules
Agilent Model Number
16760A Option Number
Description
Notes
E5378A
010
100-pin single-ended probe
Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5379A
011
100-pin differential probe
Two E5379A (or two option 011 on the 16760A) are
required to support all 34 channels on a 16760A.
Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5380A
012
38-pin single-ended probe, compatible
Maximum state analysis speed is 600 Mb/s.
with target systems designed for the
Minimum input amplitude is 300 mV p-p.
Agilent E5346A Mictor adapter cable
Requires a kit of mating connectors and shrouds
(see the next table) to connect to target system.
E5382A
013
17-channel, single-ended flying lead
Two E5382A are required to support all the channels
probe set for the 16760A
of a 16760A.
Connector and shroud kits for probes for the 16760A logic analyzer
For probe model number
For PC board thickness
Probing connector kit part number
(each contains 5 mating connectors and 5 support shrouds)
E5378A
Up to 1.57 mm (0.062")
16760-68702
Up to 3.05 mm (0.120")
16760-68703
E5379A
Up to 1.57 mm (0.062")
16760-68702
Up to 3.05 mm (0.120")
16760-68703
E5380A
Up to 1.57 mm (0.062")
E5346-68701
Up to 3.18 mm (0.125")
E5346-68700
