62
7713397 R2
Figure 58.
Section ID Tag
SECTION NUMBER
LOCATED HERE
4. LP FUELED DRYERS: Be careful of the LP vaporizer coils when stacking sections; they stick up slightly and can
be damaged.
5. PLATFORM SUPPORT COLUMNS: These are shipped secured to the platforms and should be mounted at the
bottom to the platform support angles prior to adding the next dryer section.
Figure 59.
Stacking Sections
NEXT
SECTION
BOTTOM
SECTION
PLATFORM
SUPPORT
COLUMNS
Remove Lifting Lug Top Plates
1. Prior to stacking any dryer sections, remove all 7714349 lifting lug top plates from corners of the lower
section already in place. If these are left in place, the next sections flange lips will NOT position correctly.
2. ALL of the factory mounted corner support gussets must stay attached.
Note
Lifting lugs can be left in place or removed. If removed, replace the hardware.
CONTINUOUS-FLOW GRAIN DRYER – COMMANDER CONTROL