60
7713397 R2
Important
Check verify that all anchors are tight and correctly installed according to the anchor manufacturer’s
specifications.
4.6.4 Anchor Bottom Platform
If the dryer includes the optional bottom front platform, the installation of the ladder and control panel support
legs must be done in the field.
1. An 8' ladder assembly is shipped with the bottom platform, with 080083 ladder connection plates and
040069 anchor brackets on the bottom. Loosen the 040069 anchor brackets and slide them out of the way.
Cut the ladder to the required length, and then secure the 040069 brackets back in place at the bottom of
the ladder.
2. Connect the 080083 plates to the platform rails using the provided hardware.
Figure 55.
Bottom Platform Ladder
080083
3. Anchor the 040069 brackets to the concrete pad to secure the bottom of the ladder. Follow the anchor
manufacturer's recommendations for installation.
Figure 56.
Bottom Platform Ladder Anchor
040069
Important
At the same time, the control panel should be lowered to a comfortable working height and the
panel support legs should be lowered to the ground. Support the control panel with a forklift and
then loosen the hardware supporting the vertical rails on the back of the panel as well as the
7715846 support legs. Once the panel is at the appropriate height and the legs are firmly resting on
the ground, reattached all components with the removed hardware. Anchor the support legs to the
ground, following the anchor manufacturer's recommendations for installation.
CONTINUOUS-FLOW GRAIN DRYER – COMMANDER CONTROL