30549 R1
47
6.7. Lowering Procedure
To lower auger you must:
1. Raise the intake feed hopper. DO NOT ATTEMPT TO LIFT BY HAND.
2. Disconnect PTO driveline from tractor before lowering.
3. Ensure that area beneath auger is clear.
4. Turn winch counter-clockwise to lower auger.
Important
There will be no clicking sound when lowering auger. After lowering auger, turn handle clockwise
until you hear two clicks to lock brake.
5. After auger is fully lowered, raise the intake feed hopper into full transport position.
Important
Do not operate auger with intake feed hopper in transport position. This will damage the universal joint.
Important
Wheels must be free to move when raising or lowering auger.
Before moving auger out of position, look out for electrical wires and obstructions overhead.
Electrocution can occur without direct contact. Failure to heed this warning will result in
serious injury or death.
MK/HX 10-36 – SWING-AWAY GRAIN AUGER
