AGFEO AS 181 plus, User Manual

Page: 182 / 220

3 - 14
Programming your
System
ST 25 DECT 30 ST 30
hS734Qª
Reset the System
Erase the Systems RAM
hS709Qª
System phone registration
Deregistration of System Phones
Please note, you should deregister a system phone if you unplug this to be connected to a
different SO Bus, as otherwise the previous extension number cannot be reused.
Use the following procedure to deregister a phone:
!
9#62
Programming mode must be started by entering:
*705
Lift receiver
Reset System
Acknowledgement tone, replace receiver
End Programming mode by entering:
*700
The System will reset
Programming mode must be started by entering:
*705
Lift receiver
Erase RAM
Acknowledgement tone, replace receiver
The System will resetted to delivery Settings
You may operate of up to 2 System Phones on each internal SO of an AGFEO Telephone Sy-
stem. In programming every digital phone is registered with a primary and if applicable a
secondary extension number. A system phone has be be registered when it is first plugged
into a socket. You do not need to re-register a digital phone if it is unplugged for a while and
reconnected to the same SO Bus. However, you have to register the phone again should you
plug this into a different SO Bus. Note: The extension number can be changed at any time.