AGFEO AS 181 plus User Manual Download | Manualshive

Page: 10 / 220

background image

I - 2

Installation

Safety Notice

The telephone system is for the connection to an ISDN Basic Rate line. (DSS1, Point to Point
or Point to Multi Point)

You may connect any analogue apparatus to the system which your are allowed to connect
to the Public Switched Telephone Network (PSTN).

You may also connect to an internal SO Bus any DSS1 ISDN devices which are approved to
be connected to the Public Switched ISDN Exchange. In addition up to two AGFEO Digital
Systemphones can be connected to an internal SO Bus.

Any other use of the system which does not comply with the aforesaid is prohibited.
The system has a General European Connection Licence.

- The system conforms to the specified conformity and safety regulations.

- Warning! The telephone system must have a functional electrical earth.

- DANGER! Please disconnect the apparatus from the mains socket before connecting

extensions and lines to it. Before you commence installation, please touch the printer
connection which is underneath the system to discharge any static electricity. This will
protect any static sensitive components within the equipment.

- Do not connect or disconnect any lines during a thunderstorm.

- Install all cables so that no one walks or trips over them.

- Ensure that no liquids can enter the system as otherwise short circuits maybe the

result.

- No liability will be accepted for consequential loss or damages such as call charges for

unintentional calls or connections.

- No calls can be made during a power failure. We would suggest to install surge

protectors to all lines or extensions which do not originate within the main building.

Connection cables for MoH, USB and RS232 must not exceed 3 metres.

«
...
8
9
10
11
12
...
»

Summary of Contents for AS 181 plus





























































































































































































































Reviews:

No comments

Related manuals for AS 181 plus

Brand: Panasonic Pages: 272

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands