![background image](http://html.mh-extra.com/html/agfaphoto/cc2700/cc2700_user-manual_2866759019.webp)
5. Finally press the OK button to save and return to the previous menu.
6.5 Frequency
This setting allows you to prevent the image from blinking when the
lighting conditions for shooting are low.
1. Press the Mode button to enter the setup mode and access the
settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to select from the following frequency
options: 60Hz / 50Hz / Cancel.
5. Finally press the OK button to save and return to the previous menu.
6.6 Formatting
This function allows you to format the camcorder and the memory card
by deleting all the files stored on them. Since deleted files cannot be
restored, please use this function with caution.
1. Press the Mode button to enter the setup mode and access the
settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to choose to launch formatting: Yes / No.
5. Confirm execution again: Yes / No.
6. Finally press the OK button to save and return to the previous menu.
6.7 Default settings
If the setup of the camcorder become too complex and the camcorder no
longer works properly, use this function to restore the factory default
settings. The date will not be deleted from the camcorder or memory card.
1. Press the Mode button to enter the setup mode and access the
settings menu.
2. Then press the Up / Down buttons to select this setting.
3. Press the OK button to enter the submenu.
4. Press the Up / Down buttons to choose to restore the default settings:
Yes / No.
5. Confirm execution again: Yes / No.
6. Finally press the OK button to validate and return to the previous menu.