Chapter 1 — Preparing the scanner
6
Chapter 1
—
Preparing the scanner
This chapter assists you in preparing your StudioStar for installation.
Unpacking the scanner
1.
Open the packing box and carefully take out all the items.
2.
Check each item to make sure that you have everything listed on the box and that there is no
visual defect.
If something is missing, contact your dealer.
3.
Remove the plastic wrapping and the packing materials from the scanner.
❖
Note: Save the packing materials so that you can repack the scanner to protect it if you
have to move it over long distances.
4.
Fill out the Warranty and Registration card of your scanner. You will find the product serial
number on it. You will have to fill out extra Warranty and Registration cards if you acquired the
transparency option or/and the document feeder option as well. You will find the serial
numbers of the transparency option and the document feeder option at their rear.
❖
Note: Do not forget to mail the Warranty and Registration card. Only then you can claim
your guarantee and get information on new products and upgrades.
Summary of Contents for StudioStar
Page 27: ...Chapter 2 Installing the scanner 27 ...
Page 35: ...Appendix A Using the transparency option 35 6 Lower the transparency option ...
Page 40: ...Appendix B Using the document feeder option 40 ...
Page 42: ...Appendix B Using the document feeder option 42 10 Raise the transportation module ...