Perform a quality control
In the operator room at the NX workstation, the DR Full Leg Full Spine image
is displayed in the Stitching pane.
Figure 19: Stitching pane
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical information in
the image.
The stitching parameters are displayed on the right side of the image:
Table 6: Stitching parameters
Button Parameter
0.0
Vertical correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
-0.1
Horizontal correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
Indication that automatic stitching has been performed based on
the alignment of the anatomical information in the image.
52
| DR Full Leg Full Spine | Getting started
0179E EN 20210708 1527
