WARNING:
Make sure to slide in the image plate carefully. Do not let the
plate fall down vertically into the cassette! This causes
delaminations and damages of the phosphor.
Note
:
Make certain you put the correct image plate into the
correct cassette. The label on the image plate must
correspond to the label on the cassette.
9.
When the image plate is completely inside, proceed as follows:
• First insert the key into the cassette.
• Then, close the shutter.
10.
Remove the key.
Note
:
After cleaning it is necessary to erase the detector before
use.
AGFA CR Detectors, Plates and Cassettes (CR HD5.x, CR MD4.xR, CR HM5.x, CR MM3.xR) |
Handling the AGFA CR Detectors, Plates and Cassettes |
53
2322D EN 20180409 1008
