6.
Push the top from the tube side part by slowly moving the shutter.
7.
Clean the separate parts in the following way:
Tap each part with the fleece facing down a few times on a table with
minimal force to beat out loose particles.
8.
Put the top and the tube side part together. Make sure that the tube side
part slides correctly in the top part.
9.
Slide the top part and the tube side part together.
10.
Close the locks on the right and left side of the cassette.
56
| AGFA CR Detectors, Plates and Cassettes (CR HD5.x, CR MD4.xR, CR HM5.x, CR MM3.xR) |
Handling the AGFA CR Detectors, Plates and Cassettes
2322D EN 20180409 1008